Page 1 of 1

Conections Problems - Deluo GPS Bluetooth with Palm T5

Posted: Thu Jun 02, 2005 6:02 am
by Ricardo Terra
I´m trying to use Pathaway with my Deluo Bluetooth GPS PRO
and Tungsten T5 and I have a problems when I setup the GPS in the Pathaway 3 software. The comunication do not start.
Please I want some hints.

Thanks,

Ricardo Terra
Brazil :( :(

Posted: Thu Jun 02, 2005 7:34 pm
by Scott
Protocol: Holux-NMEA
Port: Bluetooth,
Baud, 38,400 or 4800.
The specs say the baud rate is 38400, however some GPS units use NMEA at 4800. You may need to try both.

I suggest Holux NMEA because the Deluo may have the same issues. The Holux-NMEA setting addresses these.

Posted: Sat Jun 04, 2005 9:03 am
by Ricardo Terra
Dear Scott

First of all thanks for your atention.
I use Trial Version 3.01b32 and I have
only 8 days.
In my version we have only this Ports: cradle (8000), infrared (8001),Infrared, usbd,usbc, rfcm, ser0, ser2 and sir0. I do not foud a
Bluetooth port em demo version. Is impossible I test may GPS with this version ?
My T5 recognize the GPS Delue but in Pathaway 3 no conection.
I want to test it in order to buy a complete software.
Best Regards

Ricardo Terra

Brazil
Protocol: Holux-NMEA
Port: Bluetooth,
Baud, 38,400 or 4800.
The specs say the baud rate is 38400, however some GPS units use NMEA at 4800. You may need to try both.

I suggest Holux NMEA because the Deluo may have the same issues. The Holux-NMEA setting addresses these.