PathAway Support

TheSnake · Joined: 27 Mar 2006 Posts: 44 Location: S.England

Hi Scott,

Following on from a message posted somewhere else in this forum, re: JPR files for OSGB maps.

Could you please confirm if the following JPR file is good, or is missing some commands, or possibly another reason why it doesn't give me the correct parameters when I open it in MapManager!?

I get all the calibration points correctly positioned but a Calibration Type of 'Known Points Skewed'.

My Test.jpg is 16bit compressed 900x900 pixels

----------------------------
pr=Transverse Mercator
pp=-2.0
p1=49.0
p2=.9996012717
p3=-100000
p4=400000
dm=Ord Surv of Gr Britain 1936 (Mean)
nm=Test
rp1=50.6451685751828,-2.46678395875872,149,149
rp2=50.6363372325094,-2.42426937167052,601,300
rp3=50.6182436781796,-2.45238045208313,300,601
rp4=50.6094069774336,-2.40989283610171,752,752
it=jpg
----------------------------

Thanks

Scott · Posted: Thu Jul 20, 2006 12:57 am Post subject:

Setting the Projection to either Known Points, or Transverse Mercator should work. Known Points usually works best.

TheSnake · Joined: 27 Mar 2006 Posts: 44 Location: S.England

I must have an old version of MapManager then, as .JPRs with 'Transverse Mercator' do not load in correctly.

What is the latest version of MapManager and is there a separate link to it anywhere, or do I have to download and run the 'full installation'?

ts

Anders · Posted: Fri Jul 21, 2006 2:55 pm Post subject:

I think the easiest is to run a full installation. If you don't want to install the PDA files, simply remove them from the Install Tool (if you run Palm - I have no idea how it works with PPC)